background image

ABB Power Capacitors | 

Portable Capacitance Meter CB-2000 — User´s Guide  7

Safety guidelines and warnings

First aid measures

General advice

The chemicals and metals in this battery are enclosed in a sealed can. Exposure to the 
contents will not occur unless the battery is exposed to high temperatures or mechanical 
or electrical abuse.  A damaged battery will release concentrated potassium and sodium 
hydroxides, which are caustic. Anticipated potential leakage of potassium and sodium 
hydroxides is 1-2 grams per cell. 

Eye contact

If a battery is leaking and material comes in contact with the eyes, flush thoroughly with 
water for 30 minutes. Seek immediate medical attention.

Skin contact

If a battery is leaking and material comes in contact with the skin, remove any contaminated 
clothing and flush exposed skin with water for at least 15 minutes. If irritation, injury or pain 
persists, seek immediate medical attention.

Inhalation

If a battery is leaking, the contents may irritate respiratory passages. Move to an area with 
fresh air.  If irritation persists, seek immediate medical attention. 

Swallowing

If battery contents are swallowed, 

do NOT induce vomiting

. If the victim is alert, have him/

her rinse his/her mouth and the surrounding skin with water for at least 15 minutes. Seek 
immediate medical attention. 

Note to physician

The acutely toxic ingredients are concentrated (35%) potassium and sodium hydroxides and 
nickel. Anticipated potential leakage of potassium and sodium hydroxides is 1-2 grams.

Summary of Contents for CB-2000
















































Reviews: