CAP 501
Troubleshooting
Installation and Commissioning Manual
1MRS751270-MEN
ABB Automation
32
Figure 20.
MicroSCADA service must be shut down before continuing with the
installation.
In order to continue, exit the application currently utilizing the MicroSCADA service
and click ’Yes’. The application is one of the applications listed in the message. Notice
that you can not continue with the installation while the service is executing. To exit
the installation, click ’No’.
5.3
Failing to install the MicroSCADA service
If the installation of the MicroSCADA service does not succeed, the installation
displays the message shown in Figure 21.
Figure 21.
The MicroSCADA service installation has failed..
The most probable reason for this is, that the MicroSCADA service has started during
the CAP 501 installation. In order to recover from this, click ’OK’ to dismiss the
message and exit the installation by clicking ’Cancel’ on the ’Installing’ progress dialog
box. Restart the installation and install at least the Base System.
5.4
Troubleshooting destination drive error messages
Depending on the current destination drive setting and your computer configuration,
you may be notified with any of the following messages.
