1MRS751270-MEN
Installation and Commissioning Manual
CAP 501
Installation
ABB Automation
21
Figure 6.
The ’Select’ dialog box.
This dialog box provides the following information:
•
The currently selected destination drive and the root directory under which the
software will be installed.
•
The amount of hard disk space that is required and available on the currently
selected destination drive.
•
A notification that you can not select or unselect individual options.
To change the destination drive for the installation click ’Change Drive’, see the
description of the ’Destination Drive’ dialog box, on page 22. To view the previously
displayed ’System Information’ dialog box, click ’<<Back’. If you are satisfied with the
current settings, click ’Start’ to start the actual software installation.
3.3.2.7
Select - non-forced installation
In case of a non-forced installation, you will see the ’Select’ dialog box shown in
Figure 7.
