ABB C1900RC, Operating Manual

Page: 21 / 44

19
SKIP–b
PrOFLE
ProGrM
SEG xx
SKIP–F
rESEt
SKIP–F
OFF
SKIP–N
10
1
StAtES
1
YES
NO
YES
rS–End
rS–Hld
rS–run
rS–OFF
StAtES
ProFLE
rUN
or
or
or
YES
NO (if program running)
SKIP–N
ON
HOLd
rUN
NO
(if program
not running)
SKIP–b
SKIP–F
5 CONTROL OPERATION…
5.6 Profile States Page
Page Header – Profile States
The key can be programmed to jump to this frame (
Set Up Function Keys Page
,
ADVANCED CONFIGURATION LEVEL
). If the key is used, the display reverts
automatically to the first frame of the
Operating Page
when leaving this page.
Program Select
Select the program to be run (1 to 10).
Profile Status (Ramp Soak)
rS–OFF
/
ON
– (Ramp Soak Run/Off) select
rUN
to start selected program.
Press the key to activate.
rS–rUN
/
HOLd
– (Ramp Soak Run/Hold) select
HOLd
to stop selected program
at current level.
Press the
key to activate.
rS–Hld – (Ramp Soak Hold) program is in the hold state, either as a result
of an operator hold, the controller is in manual or the holdback
facility (guaranteed ramp/soak). Select run to continue running
the profile if operator has stopped program. Press the
key
to activate.
rS–HLd
/
ENd
– (Run/Hold End) the profile is completed, and the digital input
assigned to the profile function is still in the 'Run' state. This
frame is only displayed if a digital input is used to run and hold
the profile.
Note. If a digital input is assigned to the run/hold function, the user is prevented from
overriding the digital signal.
Profile Reset
If the profile is running and
YES
is selected, the profile returns to the beginning of the
program and continues to run.
Note. To end a program, select
HOLd
at the Profile Status frame (see above) and
then select
YES
at this frame. The local set point value takes the value of the first level
of the selected program.
Skip Segment
The segment number (or
End
) is shown in the upper display.
SKIP–F
(skip forward) – abandon current segment and start next segment.
SKIP–N
(do not skip) – maintain control using current segment.
SKIP–b
(skip back) – return to beginning of current segment.
For multiple skip operations, the last selection (For b) is displayed for 3 seconds
before reverting to
SKIP–N
.