manualshive.com logo in svg

ABB Busch-ComfortTouch 12.1, Operating Instructions Manual

Share
Download
ABB Busch-ComfortTouch 12.1 Operating Instructions Manual Download Page 26

Operating Instructions 

 

 

Busch-

ComfortTouch

®

 

 

Operation

 

 

 

 
 

 
 
Operating Instructions | 1473-1-8041 

— 26 —

   

Room temperature controller (basic versions, which can be adapted further) 

Climate control units can be controlled with the control element for room temperature controllers.  
 

 

 

NOTE 

The internal room temperature controller of the 

Busch

-ComfortTouch

®

 is not opened via this 

control element (see room temperature controller). 

 

Control element 

Status 

Function 

Room temperature 
controller 

The current operating mode and the mode (e.g. "Heating") 
of the controller are displayed in the control element. 
Additional operating modes can be called up with wiping 
movements. Control is carried out via the buttons. 

 
 

Philips Hue control element (basic versions, which can be adapted further) 

Philips Hue control elements can be used to define specific settings for Philips Hue lamps. For example, the 
colours can be switched or the amount of warm white can be adjusted. Control normally takes place using an 
RGB control element. 
This function is an option and only available with a corresponding plug-in. More detailed information is available 
from your electrical installer. He will also carry out the commissioning process with the aid of the commissioning 
software. 
 
 

Miele control elements (basic versions, which can be adapted further) 

With the Miele control element you have the option of transferring information and data about kitchen appliances 
from Miele to the 

Busch

-ComfortTouch

®

 and to call this information up there. It is also possible to remotely 

control certain appliance functions with the 

Busch

-ComfortTouch

®

 and to implement these for KNX devices. 

This function is an option and only available with a corresponding plug-in. More detailed information is available 
from your electrical installer. 
 
 

Sonos loudspeaker control element 

Sonos loudspeaker control elements can be used to define specific settings for Sonos loudspeakers. For 
example, titles can be selected from a favourites list. Control normally takes place using a KNX audio control 
element. 
This function is an option and only available with a corresponding plug-in. More detailed information is available 
from your electrical installer. He will also carry out the commissioning process with the aid of the commissioning 
software. 
 
 

 

Summary of Contents for Busch-ComfortTouch 12.1
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands