ABB BSM100, Installation And Operating Manual

Page: 22 / 24

2-15 MN1240
Brushless Servo Motor Identification
Frame
IEC
50
63
80
90
100
132
Series
N
C
S M B
Winding code
1
2
3
4
50
75
etc.
Motor size
Motor options
- A = Resolver
- B = Absolute encoder - single-turn (BiSS)
- B2 = Absolute encoder - multi-turn (BiSS)
- D = Absolute encoder - multi-turn (EnDat)
- D2 = Absolute encoder - single-turn (EnDat)
- D3 = Absolute encoder - single-turn (Hiperface)
- D4 = Absolute encoder - multi-turn (Hiperface)
- S1 = Absolute encoder - single-turn (SSI)
- S2 = Absolute encoder - multi-turn (SSI)
- E = Incremental encoder w/ commutation (1000 ppr)
- F = Incremental encoder w/ commutation (2500 ppr)
- H = Halls only
- V = Resolver mounting only Accessory options
Description
Connections
Motor (no shaft seal) A
E I
Motor and brake B
F
J
Motor with shaft oil seal
C
G
K
D
H
L
- Blank = No option
- M = No keyway
- N = DIN 42955-R
- O = DIN 42955-R & no keyway
- P = Optional motor connector on BSM 90/100
(Note: This option available only if current less that 28 amps)
- X = Special option (order by spec no. only)
- Z1 = Blower (115 VAC) (not available on all motors)
- Z2 = Blower (230 VAC) (not available on all motors)
-Z3 = Blower (24 Vdc)
-Z4 = Blower (230/460 VAC) for BSM132 only
Feedback options
Blank = Std
SS = Stainless steel
Note: Not all options are
available on all motors.
Contact ABB.
NEMA
5N
6N
8N
9N
10N
Standard (metric)
threaded style
Cables
Flying
leads
Optional (inch)
quick connect
Rotate-able
(metric)
threaded
Motor with brake & shaft oil seal
M
N
O
P
R
S
T
U
Note:
1 . The standard BSM50/63/80 series includes feedback, two threaded connectors for feedback and motor terminations,
square mounting flange .
2 . The standard BSM90/100 series includes, one threaded connector for feedback termination, termination of motor lead
wires on terminal block, square mounting flange .
3 . BSM motors do not have shaft seal as standard . BSM motors are IP54 . Motors will meet IP55 with shaft oil seal .
4 . SSBSM motors available with IEC mounting and include as standard a shaft seal . SSBSM motors are IP67 .
5 . The standard BSM50 series has as standard no keyway .
6 . Shielded cables and flying leads are one meter long as standard . Flying leads option is composed of individual wires
with no armored protection .
7 . Order motor power and feedback cable assemblies as separate items .
8 . Motors may be used with 115/230/400/460 volt controls . Verify that maximum speed is not exceeded .
9 . Rotatable connectors not available on BSM50-series . Standard rotatable on models up to BSM100 available (only if
current is less than 28 amps) . BSM132 requires a larger connector .
10 . Pricing for NEMA versions 5N, 6N, 8N, 9N, and 10N is the same as IEC versions 50, 63, 80, 90, and 100 .
11 . Contact your local ABB district office for special options .