AW T4 20 |
U N I V ER S A L 4 - W I R E , D UA L- I N P U T T R A N SM I T T ER | C I/AW T4 2 0 - EN R E V. B
9
Pipe-mounting (optional)
Dimensions in mm (in)
NOTICE
If the optional weathershield
F
is used, locate it against
the transmitter back panel and attach the pipe-mount kit to
the weathershield rear face and transmitter.
Referring to Figure 7, secure the transmitter to a pipe as
follows:
1
Fit two M6 x 50 mm hexagon-head screws
A
through one
clamp plate as shown.
2
Using the appropriate holes to suit vertical or horizontal
pipe, secure the clamp plate to the pipe-mounting bracket
B
using two M6 x 8 mm hexagon-head screws and spring
lock washers
C
.
3
Position the pipe-mounting bracket into the recesses on
the rear of the transmitter as shown and secure with the
two bracket securing screws
D
. Ensure the plastic washers
remain in the positions fitted.
4
Secure the transmitter to the pipe using the remaining
clamp plate, spring lock washers and nuts
E
.
Figure 7 Pipe-mounting the transmitter
A
C
E
C
B
B
D
Pipe-mount kit
Vertical
pipe
Horizontal
pipe
Pipe diameters:
max. 62 (2.44)/min. 45 (1.77)
Weathershield
(see page 7 for
dimensions)
9
