ABB AWIN GW120 User Manual Download Page 24 | Manualshive

Page: 24 / 76

background image

DECL ARATIO NS AND CERTIFICATES

BAS IC FEATURES O F AWIN GW120 GATEWAY

20

4JNO0 0030 8 A

3.9.6

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

1.

Reorient or relocate the receiving antenna.

2.

Increase the separation between the equipment and receiver.

3.

Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

4.

Consult the dealer or an experienced radio/TV technician for help.

3.9.7

IC Compliance

This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.

«
...
22
23
24
25
26
...
»

Summary of Contents for AWIN GW120













































































Reviews:

No comments

Related manuals for AWIN GW120

SmartZone EPA126

Brand: Panduit Pages: 13

Brand: Farfisa Pages: 12

StorageWorks 12000

Brand: HP Pages: 266

Brand: Askey Pages: 61

Brand: IBM Pages: 58

Brand: VBOX Pages: 11

Brand: Intermatic Pages: 6

CloudGate-mini Wi-Fi

Brand: Carel Pages: 2

Brand: Lauda Pages: 24

OfficeConnect 3CR100A97

Brand: 3Com Pages: 16

Brand: Black Box Pages: 51

SURFboard SBG7400AC2

Brand: Arris Pages: 22

Brand: Speed Touch Pages: 676

Brand: TelcoBridges Pages: 80

Brand: Nateks Pages: 67

Mobile Audio Gateway

Brand: 2N Pages: 2

Brand: 2N Pages: 102

Brand: HDL Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands