AQUA M A STE R4
| EL EC T R O M AG N E T I C FLO W M E T ER T R A N SM I T T ER | O I/FE T4 0 0 - EN R E V. D
11
4 Transport and storage
Inspection
Check the transmitter immediately after unpacking for possible
damage that may have occurred from improper transport.
Details of any damage that has occurred in transit must be
recorded on the transport documents. All claims for damages
must be submitted to the shipper without delay and before
installation.
Transport
WARNING – BODILY INJURY
Life-threatening danger due to suspended loads. In
the case of suspended loads, a danger of the load
falling exists.
Remaining under suspended loads is prohibited.
WARNING – RISK OF INJURY DUE TO FLOWMETER
SLIPPING .
The flowmeter's center of gravity may be higher than
the harness suspension points.
• Ensure that the flowmeter does not slip or turn
during transport.
• Support the flowmeter laterally during transport.
Storing the flowmeter/transmitter
Bear the following points in mind when storing transmitters:
• Store the transmitter in its original packaging in a dry and
dust-free location.
• Observe the permitted ambient conditions for transport and
storage.
• Do not store the transmitter in direct sunlight.
Storage temperature
–20 to 60 °C (–4 to 140 °F).
The ambient conditions for the transport and storage of the
transmitter correspond to the ambient conditions for
operation of the transmitter.
Adhere to the transmitter data sheet (DS/FET400/OIML-EN).