2
PROGRAMMING
Setting up the PC – HyperTerminal Setup
(Example from Windows NT – other versions of Windows may vary)
From the Windows Start
menu
select
Programs – Accessories – Communications – HyperTerminal
.
At 'New connection' enter : AquaMaster
At 'Connect using' choose : COM1 or COM2 (depending on the PC connection)
At 'Port setting' prompt choose Bits per second: 4800, Data bits: 8; Parity: None; Stop bits: 1; Flow
control: none.
Programming the AquaMaster
To access programming mode, connect the AquaMaster to a computer via either of the serial port
connections (but note that the GSM-equipped version does not have a remote port) – see Instruction
Manual ('Local or Remote Computer Connection' sections).
Use serial port settings: Baud: 4800; Data bits 8; Stop bits: 1; Parity: no.
Press
Tab
3 times to activate the programming mode.
The following display appears on the computer screen:
AquaMaster…
Nav Mode: TAB, Disp Mode: Ctrl + W
Pressing the
Ctrl
+
W
keys simultaneously initiates display mode, with the same information as that
on the transmitter display.
Press
Esc
to cancel display mode.
Pressing the
Tab
key produces the following screen:
[Next Menu=TAB][Next Item=ENTER]
[Edit = SPACE][Exit = ESC]
1.0 Information
Further key operations access the menus as follows:
Key
= Menu Displayed Text; = User entered data ; =
Function Key
Note
. Pressing
M
within a menu displays all the remaining parameters immediately.
2.0 Measurements
12:31:00
25/12/1998
Test Mode
Flow
1.0 Information
AquaMaster
ABB Limited
Stonehouse
etc.
Tab
Esc
Tab
