ABB aquamaster, Quick Reference Manual

Page: 17 / 20

15
Flow and Pressure Report Schedules
Note . Log and Totaliser reports can not
be sent unless the unit has been
supplied from the factory with the SMS
logging option enabled (parameter
406=1).
The Flow Report Schedule (>388) and Pressure
Report Schedule (>389) can be set to either of the
following options:-
0 Off
1 Daily (every day at WakeUp Base Time )
Totaliser Auto-Reports
Note . Log and Totaliser reports can not
be sent unless the unit has been
supplied from the factory with the SMS
logging option enabled (parameter
406=1).
This report if enabled sends the instantaneous
values (at the WakeUp Base Time) of all the
totalisers in the transmitter (i.e. Forward, Reverse,
Net, Tariff A, Tariff B)
Totaliser Report Shedule
The Totaliser Report Schedule (>399) can be set to
any one of the following options:-
0 Off
1 Daily (every day at WakeUp Base Time )
2 Weekly (every WakeUp Base Day at WakeUp
Base Time )
3 Monthly (1st day of each month, at WakeUp
Base Time)
WIRELESS COMMUNICATIONS…
Text Report Schedule
The Text Report schedule (>361) can be set to any
one of the following options:
0 Off
1* 30 minutes (on the
1
/
2
hour)
2* 1 hour (on the hour)
3* 2 hours (on the "even" hour)
4 Daily (every day at WakeUp Base Time )
5 Weekly (every WakeUp Base Day at WakeUp
Base Time )
6 Monthly (1st day of each month, at WakeUp
Base Time)
* These options are only functional for mains
Powered units; whilst on battery power, these
Options behave as "off".
Flow and Pressure Log Auto-Reports
Note . Log and Totaliser reports can not
be sent unless the unit has been
supplied from the factory with the SMS
logging option enabled (parameter
406=1).
SMS messages containing Flow and/or Pressure
data from Logger 1 for the previous 24 hours can
be automatically sent by the AquaMaster to one of
the three specified phone numbers.
If a schedule for Flow Log Reports is set and if
Logger 1 is set to a 15 minutes logging interval, the
last 24 hours Flow data will be contained in a single
SMS message. If a shorter interval is specified and
therefore there are more data points in the log,
then the amount of data may require multiple
messages to be sent.
Similarly, if a schedule for Pressure Log Reports is
set, then separate message(s) containing
Pressure Data are sent to the same phone
number.
Flow Report Units (>385) and Pressure Report
Units (>386) specify the engineering units used in
the reports. Pressure Reports always give the
pressure in gauge units.