Electromagnetic Flowmeter
AquaMaster™ Explorer
3 Electrical Installation
IM/AM/E
Issue 10
17
3.2.3 AquaMaster Explorer Connections – Use of Tamper-Detection Seals
Referring to Fig. 3.7:
1.
Slide the optional locking-ring
A
(from pack WEBC 2004) over the cable to be sealed.
2.
Connect the cable
B
to the appropriate transmitter connector.
3.
Slide the locking-ring
C
over the connector.
4.
Pass the wire of the seal
D
through both the hole in the locking-ring and the matching hole in the
front of the transmitter. Close the seal.
Fig. 3.7 AquaMaster Explorer – Use of Tamper-Detection Seals
Note.
This arrangement is an option and applies to Bulgin connectors only.
A
B
C
D
