Page 15
Unpacking
Place the synchronous machine so that it does not hinder the handling of any other
goods and on a flat, vibration-free surface.
When the package has been removed, a check should be made to see that the
machine is not damaged and that all accessories are included. Tick off the
accessories on the packing list which is enclosed. If there is any damage,
suspected damage, or if accessories are missing, please report this immediately to
the supplier.
Recycle packing material acc. to
Chapter 1.7.1. Recycling of material required for
transport
.
2.1.5 Bearing plate
If re-lubrication is needed, a stainless steel bearing plate is attached to the
machine frame. The bearing plate indicates the type of the bearings and
lubrication to be used, see
Figure 2-2.
Bearing plate for grease lubricated rolling
bearings
as an example.
Figure 2-2. Bearing plate for grease lubricated rolling bearings
Notation used in
Figure 2-2.
:
1. Bearing type of D-end.
2. Bearing type of ND-end.
3. Lubrication interval.
4. Quantity of grease for D-and ND-end bearings.
5. Type of grease delivered from factory.
NOTE: The information given on the bearing plate must imperatively be
followed. Failure to do so will void the warranty for the bearings.
If bearing re-lubrication is not needed for the bearing types used in generator, no
bearing plate is attached, neither.
