ABB ACS880 Series, Supplement Manual

Page: 38 / 50

34 Signals and parameters
Parameters
No Name/Value Description Def / FbEq16
74
74 Centrifuge
Decanter control
Selecting Centrifuge or Decanter control.
74.01 Centrifuge/
Decanter function
selection
Selects Centrifuge or Decanter function. Centrifuge
Not selected
Not selected. 0
Decanter
Decanter function is selected for drive operation.
Note: Drive operates based on the setting in parameter
78.01 Decanter mode select .
1
Centrifuge
Centrifuge function is selected for drive operation. See
parameter group
75 Centrifuge function .
2
75
75 Centrifuge
function
Settings for Centrifuge operation sequence
control.
75.01 Pattern reset
selection
Resets the centrifuge sequence.
Note: The drive must be stopped before reset is
possible.
DI3
Not selected Not selected. 0
Reset now Reset. 1
DI1
Reset through DI1. 2
DI2 Reset through DI2. 3
DI3 Reset through DI3. 4
DI4
Reset through DI4. 5
DI5 Reset through DI5. 6
DI6 Reset through DI6. 7
Other See Terms and abbreviations on page 30 -
75.02 Manual halt Shifts Centrifuge application to deceleration mode. DI4
Not selected Not selected. 0
Selected Selected 1
DI1 Halt through DI1. 2
DI2 Halt through DI2. 3
DI3 Halt through DI3. 4
DI4 Halt through DI4. 5
DI5 Halt through DI5. 6
DI6 Halt through DI6. 7