278 Parameters
Displays the energy saved in MWh compared to direct-on-
line motor connection. This parameter is incremented
when
rolls over.
When this parameter rolls over, parameter
is incremented.
This parameter is read-only (see parameter
).
-
0…999 MWh
Energy savings in MWh.
1 = 1 MWh
Displays the energy saved in kWh compared to direct-on-
line motor connection.
If the internal brake chopper of the drive is enabled, all
energy fed by the motor to the drive is assumed to be
converted into heat, but the calculation still records
savings made by controlling the speed. If the chopper is
disabled, then regenerated energy from the motor is also
recorded here.
When this parameter rolls over, parameter
is incremented.
This parameter is read-only (see parameter
).
-
0.0…999.9 kWh
Energy savings in kWh.
10 = 1 kWh
Displays the monetary savings in thousands compared to
direct-on-line motor connection. This parameter is
incremented when
rolls over.
The currency is defined by parameter
.
This parameter is read-only (see parameter
).
-
0…4294967295
thousands
Monetary savings in thousands of units.
-
Displays the monetary savings compared to direct-on-line
motor connection. This value is a calculated by multiplying
the saved energy in kWh by the currently active energy
tariff (
When this parameter rolls over, parameter
is incremented.
The currency is defined by parameter
.
This parameter is read-only (see parameter
).
-
0.00…999.99 units
Monetary savings.
1 = 1 unit
Displays the reduction in CO
2
emissions in metric kilotons
compared to direct-on-line motor connection. This value is
incremented when parameter
rolls over.
This parameter is read-only (see parameter
).
-
0…65535 metric
kilotons
Reduction in CO
2
emissions in metric kilotons.
1 = 1 metric
kiloton
No.
Name/Value
Description
Def/
FbEq16
Summary of Contents for ACS880 ESP
