ABB ACS880-304 +A018, Hardware Manual

Page: 228 / 280

228 Technical data
Materials
Module enclosure Hot-dip zinc coated steel sheet 1.5 … 3.0 mm (0.059 … 0.12 in), thickness of
coating 20 micrometers
Module paint coating PMS 1C Cool Gray / RAL 9002
Fire safety of materials
(IEC 60332-1) Insulating materials & non-metallic items: Mostly self-extinctive
Package Plywood base, boxed in corrugated cardboard, PET straps.
A heavy-duty cardboard package consists of a cardboard sleeve and lid, and of
a plywood pallet. The product is either screwed onto the pallet or wedged with
plywood supports to keep it in position inside the package. Protection against
conditions causing corrosion is achieved by wrapping the product in
polyethylene sheet. Alternatively VCI protection is used. Packaging is secured
with plastic straps.
Disposal The module contains raw materials that should be recycled to preserve energy
and natural resources. The package materials are environmentally compatible
and recyclable.
All metal parts can be recycled. The plastic parts can either be recycled or
burned under controlled circumstances, according to local regulations. Most
recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic DC capacitors (C1-1 to
C1-x) and printed circuit boards can be land filled. They are classified as
hazardous waste within the EU. They must be removed and handled according
to local regulations.
For further information on environmental aspects and more detailed recycling
instructions, please contact your local ABB distributor.
Standards
See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]) .
Markings
See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]).