ABB ACS880-14, Hardware Manual

Page: 42 / 248

Description Code
When no options are selected: regenerative single drive module to be installed in an enclosure,
IP20 (UL Type Open), bookshelf mounting with pedestal, external control unit with ACS-AP-W As-
sistant control panel with Bluetooth interface and panel holder, build-in LCL filter, full-size output
cable connection terminals, no EMC filter, DC connection busbars, clear plastic shrouds for covering
the input power and motor cable connections, ACS880 primary control program, Safe torque off
function, coated boards, printed multilingual quick installation and start-up guides, extraction/install-
ation ramp. -14
Size
See the ratings table. -xxxxA
Voltage range
380…415 V AC. This is indicated in the type designation label as typical input voltage level
(3~ 400 V AC) -3
380…500 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 400/480/500 V AC) -5
525…690 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 525/600/690 V AC) -7
￭
Option codes
Description Code
No IP20 shrouds for cabling area (Not to be used with H381) 0B051
EMC filter for 1st environment TN (grounded) system, category C2. Available for ACS880-14-xxxx-
3 and -5 types only.
E202
Common mode filter E208
EMC filter for 2nd environment TN (grounded) or IT (ungrounded) system, category C3 E210
No full size cable connection terminals for output power cables 0H371
Full-size input terminals H370
Full power cabling panels to be attached to a cabinet. The drive module can be pulled out from the
cabinet without disconnecting the power cables. IP20 degree of protection. Not to be used with
o0B051 and +H370.
H381
No control panel 0J400
DPMP-01 door mounting kit J410
DPMP-02 door mounting kit (surface mounting) for the panel J413
ACS-AP-I control panel J425
FDNA-01 DeviceNet™ adapter module K451
FPBA-01 PROFIBUS DP adapter module K454
FCAN-01 CANopen adapter module K457
FSCA-01 RS-485 (Modbus/RTU) adapter module K458
FCNA-01 ControlNet™ adapter module K462
FECA-01 EtherCat adapter module K469
FEPL-02 EtherPOWERLINK adapter module K470
FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
K475
FEIP-21 EtherNet/IP adapter module K490
FMBT-21 Modbus/TCP adapter module K491
42 Operation principle and hardware description