ABB ACS850 series, Hardware Manual

Page: 35 / 120

Mechanical installation
35
Delivery check and drive module identification
Check that there are no signs of damage. Before attempting installation and
operation, check the information on the type designation label of the drive module to
verify that the unit is of the correct type. The label is located on the left-hand side of
the drive module.
The first digit of the serial number refers to the manufacturing plant. The 2nd and 3rd
digit indicate the year of manufacture, while the 4th and 5th digits indicate the week.
Digits 6 to 10 are a running integer starting every week at 00001.
Before installation
Check the installation site according to the requirements below. Refer to Dimension
drawings for frame details.
Requirements for the installation site
See Technical data for the allowed operation conditions of the drive.
The ACS850-04 is to be mounted in an upright position. The wall the drive is to be
mounted on must be as even as possible, of non-flammable material and strong
enough to carry the weight of the drive. The floor/material below the drive must be
non-flammable.
Type code + options
(see page 25 )
Serial number Ratings
Compliance
markings
Frame size