Contents of the manual
The manual consists of the following chapters:
describes how to configure
ABB Drives function blocks for Siemens PLC’s.
describes how to configure the drive for PROFIBUS DP or PROFINET
control based on ABB specific drives library
ABB_DRIVE_LIB
.
provides the examples to configure S7-300 series PLC.
provides the examples to configure S7-300 and S7-1200 series PLC.
Related documents
A list of related manuals is printed on the inside of the front cover.
SIMATIC Manager/TIA portal with ABB drives and PROFIBUS
module setup
The figure below shows an example of SIMATIC Manager/TIA portal with ABB drives and PROFIBUS
module setup.
SIMATIC Manager/TIA
portal
Siemens PLC
ETHERN
ET or
serial
connecti
on
ABB drives
ABB
PROFIBUS
modules