ABB ACS350 Series, User Manual

Page: 26 / 314

Mechanical installation
26
Delivery check
Check that there are no signs of damage. Notify the shipper immediately if damaged
components are found.
Before attempting installation and operation, check the information on the type
designation label of the drive to verify that the drive is of the correct type. The type
designation label is attached to the left side of the drive. An example label and
explanation of the label contents are shown below.
Before installation
The ACS350 may be installed on the wall or in a cabinet. Check the enclosure
requirements for the need to use the NEMA 1 option in wall installations (see chapter
Technical data ).
The drive can be mounted in three different ways, depending on the frame size:
a) back mounting (all frame sizes)
b) side mounting (frame sizes R0…R2)
c) DIN rail mounting (all frame sizes).
The drive must be installed in an upright position. Check the installation site
according to the requirements below. Refer to chapter
Dimensions for frame details.
Requirements for the installation site
See chapter Technical data for the allowed operation conditions of the drive.
Wall
The wall should be as close to vertical and even as possible, of non-flammable
material and strong enough to carry the weight of the drive.
Floor
The floor/material below the installation should be non-flammable.
Free space around the drive
The required free space for cooling above and below the drive is 75 mm (3 in.). No
free space is required on the sides of the drive, so they can be mounted side by side.
ACS350-03E-08A8-4
IP20 / UL Open type
lll llllllllll llllllllll lllllllll lll llll
4 kW (5 HP) S/N YWWRXXXX
U1 3~380…480 V
lllll llllllllllll lll llllll llll llllllllll
I1 13.6 A 68468167
f1 48…63 Hz
U2 3~0…U1 V
I2 8.8 A (150% 1/10 min)
RoHS
f2 0…500 Hz
Type designation label
1 Type code, see section Type code on page 23
2 Degree of protection (IP and UL/NEMA)
3 Nominal ratings, see section
Ratings on page 290 .
4 Serial number of format YWWRXXXXWS, where
Y: 5…9, A, … for 2005…2009, 2010, …
WW: 01, 02, 03, … for week 1, week 2, week 3, …
R:
A, B, C, … for product revision number
XXXX: Integer starting every week from 0001
5 ABB MRP code of the drive
6 CE marking and C-Tick, C-UL US and RoHS marks
(the label of your drive shows the valid markings)
2
3
4
5
1
6