ABB ACS 1013-A1, User Manual

Page: 8 / 186

01 ABOUT THIS MANUAL
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL 6/184
- Appendix G - Signal and parameter table
The Signal and parameter table includes descriptions of actual signals, control and status
words, and control parameters and their default settings.
1.4 Terms and abbreviations
The following table lists terms and abbreviations you should be familiar with when using this
user manual. Some of the terms and abbreviations used in this user manual are unique to ABB
and might differ from the normal usage.
Term/Abbreviation Definition
ACS1000A ACS1000 air-cooled drive
AMC circuit board Application and Motor Controller
The digital signal processor is the heart of the control system of the drive.
Cluster A cluster is a synonym for a group of hardware modules of the drive
control system.
DDCS Distributed drive control system
DDCS is an acronym for a serial communication protocol designed for data
transfer via optical fibers.
Drive Short form for ACS1000 drive
Drive system The drive system includes all equipment used to convert electrical into
mechanical power to give motion to the machine.
DriveBus Communication link dedicated for ABB drives
DriveDebug DriveDebug is part of ABB’s DriveWare® software tools for drives using the
DDCS communications protocol. DriveDebug runs on computers with
Windows® operating systems. DriveDebug is a specialist’s tool used to
diagnose, tune and troubleshoot ABB drives.
DriveWindow DriveWindow is a DriveWare® product. DriveWindow is a 32 bit Windows®
application for commissioning and maintaining ABB drives equipped with
optical communication links.
Equipment Frequency converter and related equipment
EMC Electromagnetic compatibility
All measures to suppress electromagnetic disturbances caused by different
electrical equipment in the same electromagnetic environment, and to
strengthen the immunity of the equipment to such disturbances.
Ground Earth
To ground The conducting path (eg, conductor) between the electric equipment (eg,
frequency converter) and the earth. The electric equipment is connected to the
earth, eg, by a grounding set or a grounding switch.
INU Inverter unit of the drive. The INU converts the DC voltage to the required AC
motor voltage and frequency.
IOEC module The IOEC module is an active input and output device for digital and
analog signals.
Line voltage RMS voltage of the main power supply of the drive
MCB Main circuit breaker
The MCB is a major protection device of the drive and is the main connection
and disconnection point between the main power supply and the drive.
Molykote Brand name for lubricants
PCB Printed circuit board