ABB ACQ80, Firmware Manual

Page: 249 / 390

Parameters 249
Español Spanish. 3082
Portugues Portuguese. 2070
Français French. 1036
Chinese
(Simplified,
PRC) Simplified Chinese. 2052
96.02 Pass code
Pass codes can be entered into this parameter to
activate further access levels (see parameter
96.03 Access level status
) or to configure the user
lock.
Entering “358” toggles the parameter lock, which
prevents the changing of all other parameters
through the control panel or the Drive composer
PC tool.
Entering the user pass code (by default,
“10000000”) enables parameters
96.100
…
96.102
, which can be used to define a
new user pass code and to select the actions that
are to be prevented.
Entering an invalid pass code will close the user
lock if open, ie. hide parameters
96.100
…
96.102
.
After entering the code, check that the
parameters are in fact hidden.
Note: You must change the default user pass
code to maintain a high level of cybersecurity.
Store the code in a safe place – the protection
cannot be disabled even by ABB if the code is
lost.
See also section
User lock
(page
69
).
0
0…99999999 Pass code. -
96.03 Access level
status
Shows which access levels have been activated
by pass codes entered into parameter
96.02 Pass
code
.
0b0000
0b0000...0b1111 1=1
No. Name/Value Description Def/
FbEq16