Not allowed power cable types
Use as motor cabling
Use as input power cabling
Cable type
No
No
PE
Symmetrical shielded cable
with individual shields for each
phase conductor
■
Additional guidelines, North America
ABB recommends the use of conduit for power wiring to the drive and between the drive
and the motor(s). Due to the variety of application needs, metallic and non-metallic
conduit can be used. ABB recommends the use of metallic conduit.
The following table shows examples of various materials and methods for wiring the
drive in the intended application. See NEC 70 along with state and local codes for the
appropriate materials for your application.
In all applications, ABB prefers the use of symmetrical shielded VFD cable between
drive and motor(s).
Notes
Wiring method
Conduit - Metallic
1) 2)
Prefer symmetrical shielded VFD cable.
Electrical metallic tubing: Type EMT
Use separate conduit run for each motor.
Rigid metal conduit: Type RMC
Do not run input power wiring and motor wiring
in the same conduit.
Liquid-tight flexible metal electrical conduit: Type
LFMC
Conduit - Non-metallic
3)
Prefer symmetrical shielded VFD cable.
Liquid-tight flexible non-metallic conduit: Type
LFNC
Use separate conduit run for each motor.
Do not run input power wiring and motor wiring
in the same conduit.
Prefer symmetrical shielded VFD cable.
Metallic
Separate motor wiring from input power wiring
and other low voltage wiring.
Do not run outputs of multiple drives parallel.
Bundle each cable (wiring) together and use
separators where possible.
90 Guidelines for planning the electrical installation
Summary of Contents for ACQ580-07
