6
ACQ550-CC Packaged Drive with Bypass
Installation
The following is a typical power diagram.
Installation Flow Chart
The installation of Bypass Configurations for ACQ550 drives follows the outline
below. The steps must be carried out in the order shown. At the right of each step
are references to the detailed information needed for the correct installation of the
unit.
Task
Reference in ACQ550-U1
User’s Manual
“Installation” section
Reference in this Manual
PREPARE
for
installation
“Preparing for Installation”
Floor Mounted: “Lifting the Drive”
on page 7.
“Drive Identification” on page 8.
“Suitable Mounting Location
(Supplement to ACQ550-U1 User’s
Manual)” on page 8.
PREPARE
the Mounting
Location
“Prepare the Mounting
Location”
“Prepare the Mounting Location –
Floor Mounted Enclosures” on
page 9.
“Dimensions and Weights” on
page 27.
REMOVE
the front cover
“Remove Front Cover”
--
MOUNT
the drive
“Mount the Drive”
--
INSTALL
wiring
“Wiring Overview” and
“Install the Wiring”
“Installing the Wiring” starting on
page 10.
CHECK
installation
“Check Installation”
--
RE-INSTALL
the cover
“Re-install Cover”
--
APPLY
power
“Apply Power”
--
START-UP
“Start-Up” –
ACQ550
Drive with Bypass
3 Phase
Drive
Circuit Breaker
Input Power
Service Switch
(Optional)
Drive Output
Contactor
Motor
Bypass
Contactor
