ABB ACH580 Series, Quick Start Up Manual

Page: 6 / 14

Check that the motor data is correct. Values are predefined
on the basis of the drive size but you should verify that they
correspond to the motor.
Start with the motor type.
• Go to the edit view of a selected row by pressing
•
Scroll the view with and .
Motor nominal cos Φ and nominal torque are optional.
Press ( Next ) to continue.
To change a value in an edit view:
• Use
and to move the cursor left and right.
•
Use and to change the value.
Press ( Save ) to accept the new setting, or press
( Cancel ) to go back to the previous view without making
changes.
This step is optional, and requires rotating the motor. Do not
do this if it could cause any risk, or if the mechanical set-up
does not allow it.
To do the direction test, select Spin the motor and press
( Next ).
Press the Hand key Hand on the panel to start the drive.
6 EN – Quick start-up guide
EN