4
Installation Instructions ACF-NT, ACF-NT V0309
42/23-571 EN Rev. 5
Important Safety Information
Proper Operation
The ACF-NT analyzer system is designed for continuous measurement of
concentrations of specific components in gases or vapor.
Explosion Protection
The analyzer system must not be used to measure combustible gas/air or gas/
oxygen mixtures. The analyzer system must not be installed in hazardous locations.
Requirements for
Safe Operation
In order to operate in a safe and efficient manner, the analyzer system should be
properly handled and stored, correctly installed and set-up, properly operated and
carefully maintained.
Personnel
Qualifications
Only persons familiar with the installation, set-up, operation and maintenance of
comparable analyzer systems and certified as being capable of such work should
work on the system.
Special Information
and Precautions
These include
The content of this manual.
The safety labels affixed to the analyzer system.
The applicable safety precautions for installing and operating electrical devices
Safety precautions for working with gases, acids, condensates, etc.
Observe the safety labels affixed to the analyzer system:
Safety Labels
Affixed to the
Analyzer System
Consult
Documentation!
Hot Surface!
(Temperature
> 60 °C)
Risk of
Electric Shock!
National Regulations
The regulations, standards and guidelines cited in this operator’s manual are
applicable in the Federal Republic of Germany. The applicable national regulations
should be followed when the analyzer system is used in other countries.
Analyzer System
Safety and Safe
Operation
The analyzer system is designed and tested in accordance with EN 61010 Part 1/
IEC 1010-1, “Safety Provisions for Electrical Measuring, Control, Regulation and
Laboratory Instruments” and has been shipped ready for safe operation.
To maintain this condition and to assure safe operation, read and follow the safety
information identified with the symbol
in this manual. Failure to do so can put
persons at risk and can damage the analyzer system as well as other systems and
instruments.
Additional
Information
If the information in this manual does not cover a particular situation, ABB Service
is prepared to supply additional information as needed.
Please contact your local service representative. For emergencies, please contact
ABB Service
Telephone: +49-(0)180-5-222580, Telefax: +49-(0)621-38193129031,
E-mail: [email protected]
