ABB-Welcome
Operation
|
— 8 —
4.2.2
Mapping address mode
The address of each button can be set disorderly one by one, such as button 1=001,
button 2=003, button 3=005, button 4=002 …
If the last two rotary switches are set to 00, the device will work in the mapping
addressing mode, otherwise, it will work in the physical addressing mode.
start
1.Adjust rotary switches to 000
and hold any button for
3 s
to enter into
programming mode (beep)
2. Adjust rotary switches to the required
value (like 003) and hold dedicated
button for at least
1~3s
until hear the
prompt tone (beep)
continue to
program
End
3. Adjust rotary switches to X00
X=address of outdoor station and hold
any button for
3 s
to exit programming
mode (double beep)
N
Y