manualshive.com logo in svg

ABB ABB-free@home SAP/S.3, Product Manual

Share
Download
ABB ABB-free@home SAP/S.3 Product Manual Download Page 21

 

Connection, installation / mounting

 

 

 

 

 

 

Product manual 2CKA001473B9726 

│21

 

 

6.5 

Electrical connection 

■ 

Cat5 or Cat6 wires are connected directly via the Ethernet port.  

IMPORTANT: Use only shielded Cat5 or 6 wires

. 

■ 

For installations with a plug-in connection, the socket outlet must be mounted close to the 
SysAP and be easy to access. 

 

 

 

Use the enclosed power supply with the 
correct adapter to power the SysAP.  

1.  To connect the adapter to the power 

supply, simply slide it down the rails 
on the power supply until it locks in 
place (the figure of the adapter 
serves as an example). 

Fig. 10:  Connecting the power adapter 

 

■ 

All other devices on the network (free@home wired bus) must be powered by a separate 
NEC Class 2 (LPS) power supply. 

 

 

Hinweis 

When operating more than 64 devices, a second power supply must be used.  

 

 

 

Summary of Contents for ABB-free@home SAP/S.3

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands