Assembly Instructions / A200-H
4 Installing the turbocharger / 4.6 Connecting the turbocharger
© Copyright 2021 ABB. All rights reserved.
HZTL455311P0042_EN
Rev.A
September 2021
4.6
Connecting the turbocharger
u
Connect the cable to the speed sensor (86515).
u
Connect all exhaust gas, water, blow-by and air lines according to the instructions of the
enginebuilder.
Version with compressor wheel cooling
CAUTION
Failure of compressor wheel cooling
Any prolonged failure of the compressor wheel cooling will shorten the re-
placement interval of the compressor wheel.
u
Make sure there is an uninterrupted supply of cooling air during opera-
tion.
Fig. 13: Connecting the compressor cooling air
u
Remove the lock from the connection for the compressor wheel cooling (01) and fit the
cooling air line.
Page
17
/
21
Summary of Contents for A200-H
Page 2: ......