Assembly Instructions / A101-H
2 Safety / 2.1 Introduction
© Copyright 2019 ABB. All rights reserved.
HZTL455311P0038_EN
Rev.A
December 2019
2
Safety
2.1
Introduction
State of the art
Turbochargers manufactured by ABB Turbo Systems are state of the art and comply with the
respective health and safety standards in effect at the time the turbocharger was built. This
ensures safe operation of the turbocharger.
CE conformity information
ABB turbochargers comply with the Machinery Directive 2006/42/EC and are partly com-
pleted machinery as defined by Article 2 g.
Residual risks
Nevertheless, there may be some residual risks during operation of and work on the tur-
bocharger which:
¡
Are caused by the turbocharger itself or its accessories.
¡
Are caused by the operating equipment used or supplies and materials.
¡
Are a consequence of insufficient compliance with safety instructions.
All of the instructions contained within this chapter must be followed when working on the
turbocharger.
Responsibility of the operating company
In awareness of its responsibility, the operating company must ensure that only authorised
personnel work on the turbocharger, who:
¡
Correspond to the target group (see
).
¡
Are versed in the general and locally applicable regulations for occupational safety and
accident prevention
¡
Are equipped with the prescribed personal protective equipment
¡
Have been instructed in the use of the turbocharger.
The safety-conscious work of the personnel and adherence to the assembly instructions
must be checked periodically.
Suitable working materials and personal protective equipment must be kept in a perfect
condition.
Page
5
/
17
Summary of Contents for A101-H Series
Page 2: ......
