20
3
Clean the inside of the flow chamber
and other assemblies thoroughly.
Use mild detergent and rinse with de-
ionized water.
Inspect the wiper blades for wear or
damage and fit new ones if necessary
– see Fig. 6.4 for assembly details.
4
Optical
Emitter
Sample Outlet
Split the flowcell to access the flow chamber
– see Fig. 6.3 for procedure.
5
Reassemble flowcell using new seals.
Ensure that the modules locate in the keways before tightening the collars.
Unscrew the collar and carefully
withdraw the module.
1
Seal
Seal
Unscrew the collar and carefully
withdraw the module.
2
Optical
Receiver
Drain
Valve
Inlet/Isolating
Valve
…6
MAINTENANCE
Fig. 6.2 High Range Sensors – Cleaning the Flowcell
