ABB 6553 Series, Instruction Manual

Page: 29 / 48

27
10 PROGRAMMING…
NOT IN USE
SPT. %H2 IN CO2
xxx.x
%H2 IN CO2
xxx.x
SECURITY CODE
English
SET UP OUTPUTS
ALARM H2 IN CO2
AIR IN CO2
Relay Action EA
EB
Alarm Setpoint
RTX Type 4-20
0-20
0-10
Alter Sec. Code
Test Retrans (%)
ELECTRICAL CAL
Adjust RTX Span
Calibrate No
Yes
mV Zero (0.00mV)
xxx.x
mV Span(10.00mV)
xxx.x
Adjust RTX Zero
Operating Page
LOWER INDICATOR
Set Up Outputs Page
Electrical Calibration Page
Operating Parameters
Secure Parameters
Access to
Secure Parameters
Language
UPPER INDICATOR
Note . All parameter values shown on the
upper display line are the default settings.
LOWER DISPLAY
(RANGE 2)
No
Note . Programming of the Language page, Set Up Output page and the Electrical Calibration page should be carried
out within Range 2. If circumstances require, they can also be accessed from Range 3 scrolls. It is not necessary to work through
the Set Up Output page and the Electrical Calibration page in Range 3 once they have been set up in Range 2.
Fig. 10.2 Overall Programming Chart for Display 4689 500