Home
/
ABB
/
630 series
/
Manual

ABB 630 series, Manual, Page: 47 / 60

Share

32 pages before
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60

Page: 47 / 60

ABB 630 series Manual Download Page 47

Section 3

DNP3 protocol implementation

3.1

DNP3 device profile

The following table provides a device profile document in the standard format
defined in the DNP3 Subset Definitions Document. While it is referred to in the
DNP3 Subset Definitions as a document, it is in fact a table, and only a component
of a total interoperability guide. The table, in combination with the Implementation
table and the point list tables provides a complete configuration/interoperability
guide for communicating with a device.

Table 3:

Device profile document

DNP3 device profile document

Vendor name:

ABB Oy

Device name:

630 series IED

Highest DNP level supported:

Device function:

For requests:

Level +

○

Master

For responses:

Level +

●

Slave

Notable objects, functions, and/or qualifiers supported in addition to the highest DNP levels supported (the complete list is described in

the attached table):

For static (non-change-event) object requests, request qualifier codes 07 and 08 (limited quantity), and 17 and 28 (index) are supported.

Static object requests sent with qualifiers 07, or 08, will be responded with qualifiers 00 or 01.

16-bit, 32-bit and Floating point analog change events with time may be requested.

Floating point analog output status and output block objects 40 and 41 are not supported.

Sequential file transfer, object 70, variations 2 through 7, are not supported.

Octet string and string event objects 110 and 111 are not supported.

Virtual terminal output and event objects 112 and 113 are not supported.

Device attribute object 0 is not supported.

Data set objects 85-88 are not supported.
Maximum data link frame size (octets):

Maximum application fragment size (octets):

Transmitted:

292

Transmitted:

Configurable up to 2048

(ApLayMaxTxSize for each master session)

Received:

292

Received:

Configurable up to 2048

(ApLayMaxRxSize for each Master session)

Maximum data link re-tries:

Maximum application layer re-tries:

●

None

●

None

○

Fixed

○

Configurable

○

Configurable (0...65535)

(DLinkRetries for each channel)

Requires data link layer confirmation:

○

Never

○

Always

○

Sometimes

Table continues on next page

1MRS756791 A

Section 3

DNP3 protocol implementation

630 series

41

Point List Manual

«
...
45
46
47
48
49
...
»

Summary of Contents for 630 series





























































Reviews:

No comments