ABB 615 Series ANSI, Manual

Page: 34 / 60

Section 3
1MAC052634-MB D
Vendor-specific implementation
28 615/620 series ANSI
Communication Protocol Manual
Table 17: 16 bit SSR4 register
3.3.7.5 SSR5
SSR5 is a device alive counter. SSR5 simply counts upwards from 0 to 65535 and then
starts over. The meaning of this register is to assure that the device is actually operating.
3.3.7.6 SSR6
SSR6 is a last command register. This client dependent SSR6 register shows the result of
a specific client's last write attempt. This is especially useful if the exception code 03
appears or if the command initiates a secured control operation. The client will only see its
own results, not the results of other clients. A client with no write authority will receive a
0x0000 value response when reading this register.
Table 18: 16 bit SSR6 register
ClientCmdSEQNo
Counts the client's control operations from 0000...1111, that is 0...15, and then starts over.
CmdState
00 = No write command has ever been issued by this client
01 = Command in progress
11 = Response Ready
Bit Meaning Data category
0 Data in category 1 changed 1 = Physical inputs
1 Data in category 2 changed 1 = Protection function pickup/trip
2 Data in category 3 changed 1 = LED Alarm
3 Data in category 4 changed 1 = New disturbance record available
4 Data in category 5 changed 1 = New demand values
5 Data in category 6 changed 1 = New peak demand values
6 Data in category 7 changed 0
7 Data in category 8 changed 0
8 Data in category 9 changed 0
9 Data in category 10 changed 0
10 Data in category 11 changed 0
11 Data in category 12 changed 0
12 Data in category 13 changed 0
13 Data in category 14 changed 0
14 Data in category 15 changed 0
15 Data in category 16 changed 0
ClientCmdSEQNo Cmd State Resp Type CMDResultCode
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0