Product Description
– Night operation with a parameter-based temperature
lowering - a change-over can be effected for example
by means of an EIB clock timer.
– Freezing/heating protection mode with preset
temperatures parameters - eg 7 °C or 35 °C - a change-
over by means of contact elements is possible.
– Dew point alarm (the room temperature controller
switches off if an appropriate signal is received from an
EIB humidity sensor.)
LEDs on the room temperature controller indicate the
currently active operating mode. Use the rotary knob on
the controller to vary the applicable setpoint temperatures
within an adjustable range (± 1 °C to ± 10 °C or 0 °C = no
local adjustment).
The current switching and operating states are transmitted
via the bus line and are thus available to other EIB devices
for evaluation.
