ABB 5102xDN Series Manual Download Page 4 | Manualshive

Page: 4 / 73

background image

ABB-Welcome

Safety

|

— 4 —

Pos : 6 / Busch-J aeger (Neus trukt ur)/M odul-Str ukt ur/O nline-Dokumentation/Ü bers chrift en (--> Für alle Dokumente <--)/1. Ebene/S - T/ Sicherheit @ 18\ mod_1302612791790_15. doc x @ 103357 @ 1 @ 1

1

Safety

Pos : 7 / Busch-J aeger (Neus trukt ur)/M odul-Str ukt ur/O nline-Dokumentation/ Sicherheit (--> Für all e D okument e <--)/Warnhi nweis e/ Sicherheit - 230 V @ 18\ mod_1302606816750_15. doc x @ 103308 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 100-240 V.
–

Work on the 100-240V supply system may only be performed by

authorised electricians!

–

Disconnect the mains power supply prior to installation and/or

disassembly!

Pos : 8 / Busch-J aeger (Neus trukt ur)/M odul-Str ukt ur/O nline-Dokumentation/Ü bers chrift en (--> Für alle Dokumente <--)/1. Ebene/A - F/ Bes ti mmungsgemäßer Gebrauc h @ 18 \mod_1302763321316_15.doc x @ 103483 @ 1 @ 1

2

Intended use

Pos : 9 /Di nA4 - Anleit ung en O nline/I nhalt /KN X/D oorEntr y/ 83220- AP- xxx/Besti mmungsg emaess er G ebrauch - 83220-AP- xxx- 500 @ 20\ mod_1324561168699_15.doc x @ 112728 @ @ 1

The outdoor station is an integral part of the ABB Welcome door communication system

and operates exclusively with components from this system. The device must only be

used with suitable ABB flush-mounted installation sockets and rain hood.

Pos : 10 /Busc h-J aeg er (Neustr ukt ur)/Modul- Struktur /O nline-Dokument ati on/Übersc hrift en (--> Für alle D okument e <--)/1. Ebene/U - Z/U mwelt @ 18\ mod_1302614158967_15. doc x @ 103383 @ 1 @ 1

3

Environment

Pos : 11 /Busc h-J aeg er (Neustr ukt ur)/Modul- Struktur /O nline-Dokument ati on/U mwel t (--> Für alle D okument e <--)/Hinweis e/Hi nweis - U mwelt - Hinweis Elektrog erät e @ 18\mod_1302763973434_15. doc x @ 103500 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with

domestic waste.
–

The device contains valuable raw materials which can be recycled.

Therefore, dispose of the device at the appropriate collecting

depot.

Pos : 12 /DinA4 - Anl eitungen Onli ne/Ueberschrif ten/ 2. /ABB G eraet e @ 19\ mod_1323162843832_15.doc x @ 110875 @ 2 @ 1

«
...
2
3
4
5
6
...
»

Summary of Contents for 5102xDN Series










































































Reviews:

No comments

Related manuals for 5102xDN Series

Brand: National Instruments Pages: 9

Brand: National Instruments Pages: 9

Brand: Dahua Pages: 18

Brand: XtendLan Pages: 22

Brand: Eaton Pages: 7

Brand: Ibiza sound Pages: 40

Brand: M-system Pages: 3

Source Speakers

Brand: MartinLogan Pages: 1

Corro Wicking Bed

Brand: WaterUps Pages: 3

Brand: WAGO Pages: 92

Brand: M-E Pages: 12

Brand: Onkyo Pages: 4

Brand: Exibel Pages: 5

Brand: Balluff Pages: 42

Brand: Pure Water Pages: 22

Advance IR TSCAN-750

Brand: Amphenol Pages: 24

Brand: b-red Pages: 20

Brand: Xycom Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands