ABB 500FSD10, Manual

Page: 23 / 34

Device description Connections
Environmental conditions - mechanical
100 m/s², 16 ms
1000 shocks per direction
IEC 60255-21-2 class 1
Emission test
Radiated emissions - enclosure ports (30 Mhz
to 1 GHz), CISPR 16-2-3/ EN 55016-2-3
EN 55022/ CISPR 22 class A
Immunity test
Electrostatic discharge, IEC 61000-4-2 8 kV air / 6 kV contact (level 3), criterion A
Radiated radio-frequency electromagnetic
field, IEC 61000-4-3
10 V/m (level 3), criterion A
Radiated radio-frequency electromagnetic
field, IEC 61000-4-3
80 MHz to 1 GHz: 20 V/m (level x), criterion A
1 GHz to 2.7 GHz: 10 V/m (level 3), criterion A
Power frequency magnetic field,
IEC 61000-4-8
100 A/m (level 5), criterion A
Impulse magnetic field, IEC 61000-4-9 300 A/m (level 4), criterion A
4.5 Connections
4.5.1 Power connector (X1)
The EDS500 devices are equipped with a wide range power supply for voltages between 24
and 60 Volts DC (power consumption see device label). The connector is a 3-pin Phoenix plug
with screw terminals.
The power lead has to be sufficiently fused and a manual interrupter for the power supply
has to be installed (emergency switch). For the full effect of the overvoltage protection the
functional earthing has to be connected and the hat rail has to be earthed.
The installation has to comply with national installation standards. An external, optional
power supply can be used for connection to 230 VAC.
Power supply input (X1)
Operating voltage 24...60 V DC -15%...+20%
Power consumption (typical) specific for device, see device label
Current demand (peak) specific for device, see device label
Plug type Phoenix Contact MSTBT 2.5/3-ST
Reverse polarity protection yes
Circuit classification ES2 (acc. to IEC 62368-1)
Galvanic isolation 1.5 kV isolation voltage
Overvoltage protection ±4 kV line to earth, ±2 kV line to line
Electrical fast transient / Burst, IEC 61000-4-4 4 kV (level 4), criterion A
Surge 1.2/50 µs, IEC 61000-4-5 4 kV line to earth, 2 kV line to line (level 4), cri-
terion A
Conducted, common mode disturbances
in the frequency range 0 Hz to 150 kHz,
IEC 61000-4-16
30 V continuous disturbance/ 300 V short
duration disturbance (level 4), criterion A
1KGT151042 V000 1 23