2TLC010088M0201
Rev.A
4
1
Introduction
Scope
The purpose of these instructions is to describe the dual interlock safety switches with guard
locking, the MKey RFID -series and to provide the necessary information required for assembly,
installation, checks and adjustments after installation, and maintenance. The instructions also
include information necessary to connect MKey RFID to a safety circuit.
Audience
This document is intended for authorized personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
•
Basic knowledge of ABB safety products.
•
Knowledge of safety devices and safety locks.
•
Knowledge of machine safety.
Special notes
Pay attention to special notes in the document:
Warning!
Risk of severe personal injury!
An instruction or procedure which, if not carried out correctly, may result in injury
to the technician or other personnel.
Caution!
Risk of damage to the equipment!
An instruction or procedure which, if not carried out correctly, may damage the
equipment.
Note!
Important or explanatory information.
Summary of Contents for 2TLA050007R0602
