ABB 2CSM222521R1000 User Manual Download Page 40

Page: 40 / 49

gli

- 38 -

User manual DW

BUS VEMER MENU

BLUETOOTH MENU

The Bluetooth menu allows you to enable or disable the Bluetooth interface and change the password used to associate your device

(smartphone or tablet) to DW.

The device is supplied with deactivated Bluetooth interface. To activate it, it's enough to access Bluetooth menu and set a password different

from 000000. With Bluetooth menu it's possible to activate or deactivate the interface or change the password.

After changing the password the first time, it's not possible to set the value 000000.

To enable the Bluetooth interface:

set Bluetooth ON

To disable the Bluetooth interface:

set Bluetooth OFF

In this way no communication can take place between your device and DW. DW works with the settings and programs already set; any

changes or creation of new programs must be made by acting directly on the keyboard of DW.

Warning: to make the Bluetooth interface active, the DW must be mains powered and connected to the main page (see page 8). The

Bluetooth interface is therefore not active when browsing through the DW menus.

Summary of Contents for 2CSM222521R1000


















































Search results

Summary of Contents for 2CSM222521R1000

Reviews:

Related manuals for 2CSM222521R1000

Brands by name

Popular brands

ABB 2CSM222521R1000, User Manual

Search results

Summary of Contents for 2CSM222521R1000

Reviews:

Related manuals for 2CSM222521R1000

Brands by name

Popular brands