Abatronic AMB-12H, Instruction Manual

Page: 14 / 22

- 13 -
4.1 REMOTE CONTROL DISPLAY
(Figure 17)
1. INCREASE BUTTON
2. RUN BUTTON
3. DECREASE BUTON
4. AIR SPEED BUTTON
5. MODE BUTTON
6. UPPER AIR OUTLET BUTTON
7. TIMER BUTTON
8. UPPER SWING BUTTON
9. CLOCK BUTTON
10. LOWER SWING BUTTON
11. LOWER AIR OUTLET BUTTON
12. SLEEP/NIGHT BUTTON
13. STANDBY BUTTON
14. TIMER DISPLAY
15. TIMER ON DISPLAY
16. TIMER OFF DISPLAY
17. AIR SPEED DISPLAY
18. LOWER AIR OUTLET DISPLAY
19. SLEEP/NIGHT MODE DISPLAY
20. UPPER AIR OUTLET DISPLAY
21. DEHUMIDIFYING MODE DISPLAY
22. COOLING MODE DISPLAY
23. AUTOMATIC MODE DISPLAY
24. FAN MODE DISPLAY
25. HEATING MODE DISPLAY (When
flashing unit is in defrost mode – wait until
completed)
26. UPPER SWING DISPLAY
27. TEMPERATURE DISPLAY
28. LOWER SWING DISPLAY
29. TIME DISPLAY
4.2 REMOTE CONTROL OPERATION
4.2.1 There are two main methods following to use this remote controller
1. Run>> Select the operation mode >> Select air direction >> adjust the temperature
setting >> adjust air speed >> standby
2. Select operation mode>> adjust the temperature setting>> adjust air direction>>
adjust air speed >> Run >> standby
4.2.2 Button Functions
Fig17