bdi
Access
JTAG interface library, BDI1000 (ARM7/9/9E)
Installation Manual
6
© Copyright 1992-2008 by ABATRON AG
V 1.02
2.1.1 Changing Target Processor Type
Before you can use the BDI1000 with an other target processor type (e.g. ARM <--> PPC), a new
setup has to be done (see chapter 2.6 «Configuration»). During this process the target cable must
be disconnected from the target system. The BDI1000 needs to be supplied
between 2.5V and 5V
via the POWER connector. For more information see chapter 2.2.1 «External Power Supply».
To avoid data line conflicts, the BDI1000 must be disconnected from the target system while
programming the logic for an other target CPU.
!
