background image

8 of 10 

• 

DAY 1-180: A unit that fails between 1 and 180 days after sale will be repaired at no cost 
to the user. This may involve paying for repair services, parts, transportation, and repair 
consumables, depending on how and where the repair is carried out. 

 

• 

DAY 181-365: A unit that fails between 31 and 365 days after sale will have parts and 
labor charges covered under warranty, but transportation charges are to be paid by the 
customer. Transportation costs include travel charges by repair personnel, or shipping 
charges to move the unit to and from a repair location. 

 

• 

YEAR 2-5: A unit that fails in the second through fifth year inclusive will be covered for 
the compressor, evaporator coil and condenser coil – parts only. No labor will be 
provided. The customer will be responsible for the cost of the repair (less the covered 
parts), any transportation involved, as well as the shipping cost of having the parts sent 
to them.  

 

 
ATI will not be responsible for: 
 

1.  Useful filter life / replacement filters. 
2.  Damage due to failure to perform normal maintenance as outlined in the Instruction 

Manual. 

3.  Failure to start due to voltage conditions, blown fuses, open circuit breakers, or any 

other damages due to the inadequacy or interruption of electrical services. 

4.  Damage or repairs needed as a consequence of any misapplication, abuse, neglect, 

unauthorized alteration, improper servicing, or operation, including operation outside the 
voltage and frequency limitations as stated on the unit rating plate. 

5.  Damage as a result of flooding (immersion), fires, lightning, freezing of residual water, 

corrosive environment, or other conditions beyond the control of ATI. 

6.  Reimbursement for warrantable replacement parts not supplied by ATI. 
7.  Shipping damage, or damage as a result of abuse in transporting the unit. 

 

ATI does not warrant that the goods sold are merchantable or fit for any 
particular purpose. ATI makes no warranties other than as stated in this paragraph. 
 
All other warranties, guaranties, or representations, express or implied, by operation of 
law or otherwise, are expressly disclaimed. 
 

Goods found by ATI to be defective or not to conform to specification shall 
upon return be replaced or repaired by ATI without any additional charges, or, at ATI’s option, 
ATI may refund the purchase price of such goods. Where applicable, as indicated above, ATI 
will pay return transportation charges on returned goods not exceeding the transportation 
charges applicable to shipment from original destination unless the returned goods are free from 
defect and conform to specifications. Be sure to review the instruction booklet. Returned goods 
which are found by ATI to be free from defect and to conform to specifications shall be held for 
Purchaser’s shipping instructions, which instructions Purchaser shall furnish promptly upon 
request. 
 

ATI’s liability shall in no event extend beyond replacement, repair or refund of the 
purchase price and ATI shall not be liable under any circumstances for special, 
contingent or consequential damages, nor for loss, damages, or expenses directly or 
indirectly arising from the use of the goods, including without limitation, warehousing, 
labor, handling and service charges, die, equipment, or machine breakage, nor for costs, 
lost profits or loss of good will. The use of substitute, non-ATI parts and/or filters, in any 

Summary of Contents for AQUATRAP AT100S











Reviews: