Abatement Technologies HEPA-AIRE V8000WD MK-2, Operating Manual, Page: 9 / 28

V8000WD
MK-2
7 Maintenance
7.1 Maintenance plan
After work As required
7.2.1 Emptying the dirt tank
X
7.2.2 Replacing the filter bag
X
7.2.3 Replacing the filter element X
X
7.2.4 Check suction hose and
accessories for clogging,
clean if necessary.
7.2 Maintenance work
7.2.1 Emptying the
dirt tank
1. Remove the upper section of
the cleaner from the dir t
tank.
2. Hold the dirt tank at the grip
underneath the tank and tip
out the dirt.
3. Dispose of the dirt in ac-
cordance with legal regula-
tions.
4. Clean the rim of the tank
before fitting the upper
section of cleaner .
Before reinserting the suction
hose:
5. Clean the inlet fitting and
hose collar.
7.2.2 Replacing the
filter bag
1
. Remove the upper section of
cleaner from the dirt tank.
2 . Carefully remove the filter
bag connection from the
inlet fitting.
3. Close the filter bag connec-
tion with the slide
.
4. Dispose of the filter bag in
accordance with legal
regulations.
IMPORTANT!
5. Place a new filter bag into
the clean tank as described
in the instructions (printed on
the filter bag).
Press the filter bag connection
firmly onto the inlet fitting.
( continued >)
6
6