8
1500W 1 single cable for NTC.
NTC
OPTION 3 – remote driver installation
•
Open the floodlight junction box.
•
Disconnect the DC input 8 wire cable
①
(H07RN-F 8x1.0mm2) and remove it
•
Replace the gland
②
if required.
1
2
•
Connect a new DC input cable of sufficient length and
connect it as per below (max cable length 200m).
•
Use new M25 gland if required (not included).
•
Use cable protection if required (not included).
•
Install the floodlight on the mounting bracket with an
M20 (grade 8.8 or higher) nut and bolt (max torque
settings 500Nm)
•
Remove the driver terminal cover (4 bolts T20 Torx)
•
Remove the cable gland
①
3
4
②
①
DC input
①
②
