4
•
Tighten the glands to cables to the torque
settings below:
o M25 gland – 5Nm
o M20 gland – 3.5Nm
•
Close the driver terminal cover with the 4 No.
T20 torx bolts (torque settings 1.6Nm)
Blue
Brown
White
Black
Gray
Purple
Purple
Gray
Yellow/Green
Red
Blue
Brown
Yellow/Green
DC output
Dimming/Dali
AC input
6
•
Connect the DC output cables to the relevant driver
terminal blocks, as shown below.
5
•
Loosen M14
①
and M8
②
bolts located on both
sides of the floodlight.
•
Elevate the floodlight to the relevant angles.
•
Tighten the M14
①
(40~45Nm) and
M8
②
( 30~35Nm) bolts.
7
①
②
