Solares
TM
Smart Spa Installation Manual
CD0037
-17-
1121
Side Panel Trim Removal Instructions
1.
Ensure tub is raised up to highest position.
2.
Remove side panel by opening access panels and removing thumb screw located towards
back side of cutout.
3.
Remove screws securing lower part of frame (Detail B) and let front of frame rotate
downward.
4.
Remove screws shown in Detail A while supporting frame.
5.
Pull frame down and out to remove from tub.
6.
When ready to reinstall start by tucking front of trim into front edge of tub.
7.
Slide trim up until top edge of trim is recessed behind tub shell.
8.
Align rear slots of frame with threaded inserts in the back of the frame as seen in Detail A
and loosely install the screws.
9.
Lift the front edge of the frame up until the slots line up with the holes located towards
the front of the frame as shown in Detail B.
10.
Lightly thread in screws.
11.
Adjust frame in or out so that lines up well with the tub shell and secure all the screws.
Rapid Fill Installation (If Applicable): See 990131
