ASSEMBLY INSTRUCTIONS
AB ROCKET TWISTER™ STYLE#: 8332
AB ROCKET™ and AB ROCKET TWISTER™
are trademarks of EMSON®
Distributed By EMSON NY, NY, 10001 ©Copyright 2010 EMSON
All Rights Reserved. Printed In China.
CUSTOMER SERVICE 1-800-423-4248
STORAGE
For easy storage under the bed, simply remove both top
Screw Tops
by rotating them
counterclockwise,
see Illustration 2
. Leave the bottom
Screw Top
attached. Bring the
Resistance Springs
down, replace the
Screw Tops
. Bring down the
Padded Back
Support
. Both
Grip Handles
can be removed (if needed) for easy storage. Just press
the
Spring Pins
on both
Grip Handles
and remove them.
6A
The seat is designed so it can swivel in both
directions while exercising.
1.
See Illustration 6A.
If the exercise
requires the seat to swivel, simply pull up
the
Pin
and remove it.
2.
See Illustration 6B.
The seat will swing in
both directions.
3. If you need to secure the seat, move it to
its original (straight) position so both openings
of the right grip handle and seat are
lined up and insert the pin in.
6B
SEAT SWIVEL
The Ab Rocket Twister is equipped
with the Clicker located on the back
of the right back support metal bar.
When you complete a full ab crunch,
you will hear a click.
If you would like to remove the click
feature,
see Illustration 7.
Using the
screwdriver, remove both screws and
the clicker bracket. Now you will no
longer hear a click while doing
crunches.
CLICKER
BACK OF UNIT (RIGHT SIDE)
CLICKER BRACKET
7
