Publication 22C-SB003A-EN-P – August 2008
2
PowerFlex 400 Frames D-H Replacement Procedure for Main Control Board
What You Need
•
A #1 Phillips screwdriver, preferably an adjustable torque driver capable
of 0.9 to 2.9 N-m (8.0…25.7 lb.-in).
Replacement Procedure
The replacement procedure for the main control board is described in the
following sections:
❐
Recording Parameter Settings from the Main Control Board on page 2
❐
Removing and Locking Out Power on page 4
❐
Opening the Drive on page 4
❐
Replacing the Main Control Board on page 7
❐
Putting the Drive Back Together on page 9
❐
Programming the Parameters for the Main Control Board on page 10
Recording Parameter
Settings from the Main
Control Board
Before removing the old main control board, you need to record the
parameters and their values from it.
Recording user parameters
1. Power up the drive.
2. Use DriveExplorer or the 22-HIM CopyCat feature to copy all the user
parameters from the old main control board.
3. Save the user parameters into a file.
You may download this file onto the new main control board after it is
installed.
Recording hidden parameters
Check to see if there is a label next to the keypad on the control board.
The label lists these parameters:
•
d321 [DriveType]
•
H446
•
H447
•
H448
