AB-COM IPBOX 400S, Manual

Page: 21 / 76

19
10.3. LNB setting.
The LNB Setting menu will appear automatically right after adjusting Local Time. You can select
Tuner 1 to set up by pressing LEFT/RIGHT button or RED and GREEN button. Select the right
connection type of LNBs between Separated and Loop Thru as the tuner connected. Choose the
Number of LNBs, then press OK button to setup each LNB.
10.3.1. Set each LNB parameter.
SAT Name, LNB Type, Local Freq, DiSEqC Ver, DiSEqC No, 22 KHz, and TP Freq by
pressing LEFT/ RIGHT button as your LNB and dish aimed. You can see whole values of
each item if you press OK button. Press MENU or EXIT button when you complete
putting all settings. You will see the Signal indicator as yellow if all values are set correctly.
(Blue color means incorrect settings.)