AB-COM IPBOX 400S, Manual

Page: 13 / 76

11
the LED blinks three times.
5.1.2. Using direct entry method
1. Turn on the component (TV) you want to control.
2. Locate the Code List (refer to code list on the page 59). Find your TV brand that you want
to control.
3. Press and hold the TV button until the LED on the remote control turns on red, then release
the key.
4. Enter 3-digit code from the code list, then the LED blinks three times.
5. If you get no response, repeat these steps using the next code listed for your TV brand
until the component responds to the remote control command.
5.1.3. Locking the volume control.
Locking the volume controls to a single device makes it easier to control volume, without
having an unexpected volume change. If you lock the remote's volume controls to the TV
set, you will be always able to change the volume to the level you want, without having
adjusting it twice on multiple devices.
If you want to lock the volume for the TV system;
1. Press and hold the
STB
component key until the LED on the remote control turns on.
2. Enter 3-digit code,
9 9 9 .
3. Press and release the
STB
component key, then the LED blinks three times.
5.1.4. Unlocking the volume control.
If you want to unlock the volume for the
STB
component;
1. Press and hold the
STB
button until the LED on the remote control turns on.
2. Enter 3-digit code,
9 9 9
.
3. Press and release the
STB
component key, then the LED blinks three times.
☞
NOTICE
Find the TV brand code list on the page 60.
6. FRONT PANEL